Modem Firmware/Portware Upgrade ProcedureĬomplete these steps in order to upgrade the firmware/portware on your modems:Ĭopy the firmware/portware file into flash memory from a TFTP server. Refer to Cisco Technical Tips Conventions for more information on document conventions. If your network is live, make sure that you understand the potential impact of any command. All of the devices used in this document started with a cleared (default) configuration.
The information in this document was created from the devices in a specific lab environment. This document is not restricted to specific software and hardware versions. There are no specific requirements for this document. Refer to Analog Modem Firmware Upgrade Configuration Note for more information on how to upgrade the code on the analog modem modules. Note: This document does not describe the portware upgrade procedure for analog modems in the NM-8AM and NM-16AM modules. Refer to the software installation instructions of your hardware for more information on the upgrade process. Alternatively, you can use the newer File Transfer Protocol (FTP) copy. This document assumes you already have a Trivial File Transfer Protocol (TFTP) server that contains the new modem firmware/portware images you need to load onto your router. This step-by-step guide describes the firmware/portware upgrade process for Cisco routers with digital modems.
0 kommentar(er)
